Front-Panel Components - D-Link DGS-3620-28SC-EI Hardware Installation Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Hardware Installation Guide

Front-Panel Components

The front panel of the DGS-3620 Series consists of the Management and Console port, LED indicators for Power,
Console, and stacking ID LED's. A separate table below describes LED indicators in more detail.
DGS-3620-28TC

Twenty 10/100/1000BASE-T ports

Four Combo 10/100/1000 Base-T/SFP

Four SFP+ ports

SD Card slot

2 Digital in and 1 Digital out Alarm connector

LEDs for Power, Console, RPS, SD card slot, MGMT and Link/Act/Speed for each port

Console and Management Port
DGS-3620-28TC-DC

Twenty 10/100/1000BASE-T ports

Four Combo 10/100/1000 Base-T/SFP

Four SFP+ ports

SD Card slot

2 Digital in and 1 Digital out Alarm connector

LEDs for Power, Console, MGMT, SD card slot and Link/Act/Speed for each port

Console and Management Port
DGS-3620-28SC

Twenty SFP ports

Four combo 10/100/1000BASE-T/SFP

Four SFP+ ports
Figure 1–1 Front panel view of a DGS-3620-28TCSwitch
Figure 1–2 Front panel view of a DGS-3620-28TC-DC Switch
Figure 1–3 Front panel view of a DGS-3620-28SC Switch
12