NEC Express5800/320Fd-LR User Manual page 249

Installing and Using Utilities 5-31
Ethernet Adapters You Do Not Use
If an Ethernet adapter is not used (not connected to cable), set it to "Disable" in [Network
Connections] from Control Panel. If an Ethernet adapter you are about to disable has dual LAN
settings (AFT function), remove the dual LAN settings before disable it.
DataViewer display when only one of the PCI modules (IO modules) is operating
When only one of the PCI modules (IO modules) is operating (non-dual configuration), the SCSI
enclosure or mirror disk status cannot be displayed normally.
To check if the dual configuration is changed to the simplex operation mode, check the event log,
AlertViewer log, or the status color of PCI module of DataViewer.
Display of Ethernet Board of ftServer Utility
FtServer Utility displays the information of Network Controller.
Express5800/320Fd-LR/MR has four in-built Network Ports. Two trees of the Ethernet Board are
displayed since a module has two Network Controllers.