AEG 6010 K Operating Instructions Manual
Ceramic glass hob
Hide thumbs
Also See for 6010 K:
- Installation and operating instructions manual (22 pages) ,
- Operating and installation instructions (16 pages) ,
- Operating and installation instructions (16 pages)
Related Manuals for AEG 6010 K
Summary of Contents for AEG 6010 K
- Page 1 6010 K Ceramic Glass Hob Operating Instructions Installation Instructions...
-
Page 2: Dear Customer
Before calling out an engineer to a fault please read the chapter „What to do if...“ as you may be able to resolve the problem yourself. For further assistence contact your local AEG Service Force Centre, see the chapter „Service“. -
Page 3: Table Of Contents
Contents CONTENTS Operating Instructions ........24 Safety . -
Page 4: Operating Instructions
Improper repairs can cause injury or significant mal- function. If your appliance needs repairing, please contact your local AEG Service Force Centre. • If your appliance malfunctions, or fractures, cracks or splits appear: – switch off all cooking zones, –... -
Page 5: Safety When Cleaning
Operating Instructions Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual. How to Avoid Damage to Your Appliance •... -
Page 6: Disposal
Operating Instructions Disposal Disposing of Packaging Materials • All packaging can be recycled, sheet and hard foam parts are appro- priately marked. Please dispose of packaging material and any old appliance with due regard to safety and the environment. Information on disposal •... -
Page 7: Appliance Description
Operating Instructions Appliance Description Features of the hob Single Cooking Zones Control Knobs Single Cooking Dual Cooking Zone Zone Four Residual Heat Indicators (separate for each zone) Control Panel Control Knobs for Rear Right Cooking Zone for Rear Left Cooking Zone for Front Left Cooking Zone for Front Right Cooking Zone... -
Page 8: Before Using For The First Time
Operating Instructions Before Using for the First Time Initial Cleaning Wipe the ceramic glass cooking surface with a damp cloth to remove any traces left from manufacturing. Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. Suitable Pans •... -
Page 9: Using The Cooking Zones
Operating Instructions Using the Cooking Zones When the cooking zones are switched on, they may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance. Control Knobs •... -
Page 10: Switching On The Dual Cooking Zone
Operating Instructions Switching on the Dual Cooking Zone The switch for the dual cooking zone is switched on by turning clock- wise and must not be turned past the stop! 1. Turn the switch for the dual cooking zone clockwise. Turn past position 9 through light resistance at the symbol, to a clearly noticeable stop. -
Page 11: Usage, Tables, Tips
Operating Instructions Usage, Tables, Tips Pans The better the pan, the better the results. • You can recognise good pans by their bases. The base should be thick and as flat as possible. • Pans with aluminium or copper bases can leave metal discoloration on the glass ceramic surface that is very difficult or impossible to remove. -
Page 12: Tables
Operating Instructions Tables Typical Heat Settings The information given in the following tables is for guidance only. The heat setting necessary for cooking is dependent on the quality of the pans, and the type and quantity of the food. Switch Cooking Process/ Suitable for Setting... -
Page 13: Cleaning And Care
Operating Instructions Cleaning and Care Ceramic Glass Important: Cleaners must not come into contact with the ceramic glass when hot! All cleaners must be removed with plenty of clean water after cleaning as they may have a caustic effect when the rings are next heated! Do not use any aggressive cleaners, such as e.g. -
Page 14: The Hob Frame
Operating Instructions Burnt on Soilage 1. Remove burnt on sugar, melted plastic, aluminium foil or other melted materials immediately, while the hob is still hot, using a glass scraper. Important: When using the glass scraper on the hot cooking zone, there is a risk of burns! 2. -
Page 15: What To Do, If
Warning: Repairs to the appliance may only be carried out by approved service engineers. Improper repairs can cause injury or serious malfunc- tion. If your appliance needs repairing, please contact your local AEG Service Force Centre. -
Page 16: Installation Instructions
Installation Instructions INSTALLATION INSTRUCTIONS Important! This appliance must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant coun- try standards. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Technical Data Appliance Dimensions Width... -
Page 17: Regulations, Standards, Directives
Installation Instructions Regulations, Standards, Directives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 in respect of the safety of electrical appliances for household use and similar purposes and • DIN 44546 / 44547 / 44548 in respect of properties of electric cookers for the household. -
Page 18: Safety Instructions For The Installer
Installation Instructions Safety Instructions for the Installer • This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant country standards. • In respect of fire protection, this appliance corresponds to type Y (IEC 335-2-6). -
Page 19: Electrical Connection
Installation Instructions Electrical Connection • The mains connection terminals are on the underside of the appli- ance, behind a cover. The hob is to be connected in accordance with the connection diagram as a function of the mains supply present... Connection Diagram 230 V 230 V~ 230 V~... -
Page 20: Uk Only
Installation Instructions UK only Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. This hob must be earthed. The manufacturer declines any liability should these safety measures not be observed. -
Page 21: Service
Service SERVICE In the “What to do, if …” section a number of malfunctions are listed that you can rectify yourself. In the event of a malfunction, look there first. Is it a technical malfunction? Then please contact your customer service centre. (You will find addresses and telephone numbers in the "Customer Service Centres"... -
Page 22: Installation
Montage / Installation MONTAGE / INSTALLATION... - Page 23 Montage / Installation min. 25 mm min. 5 mm...
- Page 24 Hier Typschild aufkleben! (nur für Werk) AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG ANC 822 947 096 - 05 - 1299...