Connection Status - NETGEAR MBR1210 User Manual

Connection Status

Click the Connection Status button on the Router Status screen:
This screen shows the following statistics:
Table 11.
Field
Mobile Broadband
Service
50 | Chapter 4. Managing Your Network
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Description
Connection Status The status of the Internet connection.
• Scanning. The modem is scanning for broadband wireless
• Connected. The router is connected to the Internet.
• No USB Device Attached. The router does not detect a
Received Signal Quality Modem radio reception. A small, negative number indicates
(in dBm) good signal quality.
Bytes Transmitted The number of bytes transmitted in the most recent connection
session.
Bytes Received The number of bytes received in the most recent connection
session.
Tx B/s The transmission rate.
Rx B/s The receiving rate.
System Uptime Time elapsed since the last reboot.
networks in your area.
USB modem connected to its USB port. Either the modem is
disconnected, or it is not correctly seated. To correct the
problem remove the modem and reinsert it into the port.