Table of Contents
Advertisement
Enable
Display Name
Physical Mode
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for the WAN1/WAN2 interface.
For WAN1, the physical connection is done through Ethernet
port; yet the physical connection for WAN2 is done through
an Ethernet port (P1) or USB port.
To use 3G network connection through 3G USB Modem,
choose 3G USB Modem as the physical mode in WAN2.
Next, go to WAN>> Internet Access. 3G USB Modem is
available for WAN2. You can enable PPP as the access mode
and complete further configuration.
23
Vigor2955 User's Guide
Advertisement
Table of Contents
