Bandwidth Limit - Draytek VigorPro 5510 Series User Manual

To activate the function of limit session, simply click Enable and set the default session
limit.
Enable
Disable
Default session limit
Limitation List
Start IP
End IP
Maximum Number
Add
Edit
Delete
Index (1-15) in Schedule
Setup
3 . 8 . 2 B a n d w i
3 . 8 . 2 B a n d w i
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large
of bandwidth and affect the applications for other programs. Please use Limit Bandwidth to
make the bandwidth usage more efficient.
VigorPro5510 Series User's Guide
Defines the default session number used for each computer in
LAN.
Displays a list of specific limitations that you set on this web
page.
Defines the start IP address for limit session.
Defines the end IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Delete the selected settings existing on the limitation list.
d t h L i m i t
d t h L i m i t
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application >>
Schedule web page and you can use the number that you
have set in that web page.
129