3
.
7
.
5
A
I
/
A
V
A
u
t
o
3
.
7
.
5
A
I
/
A
V
A
u
t
o
This page can determine the block standard for data transmission based on the AI/AV auto
block setting. In another word, when the host is attacked over the count number set here, the
system will block the data transmission from the source IP automatically for security.
Limitation List displays the specific limitations that you set in this web page.
Enable/Disable
General Setup
B
l
o
c
k
B
l
o
c
k
Click Enable to activate AI/AV Count Setting. The AI/AV auto
block setting result will be seen in Diagnostics>>LAN Security
Monitor. Default setting is Disable.
Settings configured here will be applied for most of the defense
events (intrusion/virus) except settings configured in Specific
Limitation.
AI Count – type the number for the system to block the connection
of the source IP for AI events.
Severity – choose Low, Medium or High for the system to block
the connection of the source IP for AI and AV events.
AV Count – type the number for the system to block the connection
of the source IP for AV events.
122
VigorPro5510 Series User's Guide