Resize Mode - Sharp Conference Series XG-PH80W-N Operation Manual

Image Projection (Continued)

Resize Mode

This function allows you to modify or
customize the Resize mode to enhance
the input image. You can set the Resize
mode in "SCR-ADJ" menu. See page
49.VID
1 1
Press MENU to display the menu
screen, and then press O or Q to
select "SCR-ADJ".
2 2 Press P or R to select "Resize".
3 3 Press O or Q to adjust the
desired Resize mode and then
press (ENTER).
Resize Mode
RESIZE
Normal
Full
16:9
34
Output screen image
The image is displayed with the original aspect ratio.
The image is displayed at full-screen.
An image compressed from a 16:9 aspect ratio to a 4:3 aspect ratio
is restored to a 16:9 aspect ratio and displayed at full-screen.
Note
• The RESIZE function that can be selected
varies depending on the input signal
(resolution and vertical frequency).
Adjustment buttons Adjustment buttons
(P/R/O/Q) (P/R/O/Q)
(ENTER) button (ENTER) button
MENU button MENU button