Sharp DV-L88S Operation Manual page 87

Programmed Playback
3
After you have specified all title numbers
you want, press | to move the highlighting
to the next. Then press ENTER to start play
in the sequence you specified.
• Titles are played in the sequence you specified.
• When entering title numbers that do not exist on the disc in step 2, this
operation is disabled.
• Press RETURN if you want to exit the above screens.
• You cannot program the play sequence while a disc is playing.
• Play sequence programming does not work with a disc that does not include title
information.
• Play sequence programming does not work with a disc that disables
programming. The indicator ø is displayed when playing back such discs.
• Play sequence programming does not work immediately after you load a disc into
the Player. It can be used only after the disc has been played, even if only
partially.
To stop programmed play
1
Press Ë (STOP).
• The number you input is not stored in memory if there is no corresponding
title number on the disc. Make sure you input title numbers correctly.
• If you input the wrong number, press \ and then re-input.
• To exit the programming procedure part way through, press RETURN.
86
GB
/9
PROGRAM
DVD