Honda 2009 Pilot Owner's Manual page 497

BULB
SOCKET
4. Remove the socket by turning it
one-quarter turn counterclockwise.
5. Pull the bulb straight out of its
socket.
6. Push the new bulb straight into
the socket until it bottoms.
7. Turn on the lights to make sure
the new bulb is working.
8. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
9. Install the rear light assembly in
the rear pillar. Tighten the two
bolts securely.
Lights
Side Turn Signal Lights
On Touring models
Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.
491