Prerequisites - HP e3000 MPE/iX Manual

Mpe/ix computer systems

Hide thumbs Also See for e3000 MPE/iX:

Table of Contents

Introduction

Prerequisites

The reader of this document must be familiar and knowledgeable with the

following subject matters:

•

Performing HP e3000 system administration tasks, such as configuring disk

Ldevs using SYSGEN. See manual Performing System Management Tasks

at http://www.docs.hp.com/mpeix/all/

Creating and using HP e3000 User Volumes Sets. See manual Volume

Management Reference Manual at http://www.docs.hp.com/mpeix/all/

If a SCSI-FC fabric router is included as part of the connectivity solution then

see manual SCSI-Fibre Channel Router Installation and User Guide at

http://www.docs.hp.com/mpeix/all/ for details on configuring and

troubleshooting the A5814-003 Fabric Router.

Configuration of MPE/iX 7.5 Native Fibre Channel devices using the

A6795A 2Gbit FC HBA is covered in MPE/iX 7.5 Communicator. See

http://www.docs.hp.com/mpeix/all/

Knowledge on how to configure LUNs on HP SureStore Arrays for access

through dual ported arrays. This work should be performed by a storage

specialist.

Table of Contents