Recording A Track Into An Existing Group; Recording Without Overwriting Existing Material - Sony MZ-S1 Operating Instructions Manual

Recording a track into an
existing group
• [ham group mode on.
• Insert a disc with group settings.
1 Press GROUP.
"Fa"I " flashes in the display and you
can select a group directly (Group
Skip Mode) (page 33).
2 Within 5 seconds, press _ or
repeatedly until the group you want
lhe track 1o belong to appears.
3 Press _ while pressing REC.
Play the source sound.
The newly recorded track is added
al_er the current contents.
Notes
• Even if "R-Posi" is set to "FrHere", newly
recorded tracks are inserted after the existing
tracks in the speaitied group without
recording over the current contents.
• Group skip mode lunas off automatically in
step 2 if nothing is done within 5 seconds.
To continue the procedure, do step I again.
To add a track that is playing to a group, stop
playing the track first, and then do the
procedure from slep 3.
Recording without
overwriting existing
material
If you wish lo avoid overwriting lhe
current contents of an MD, do lhe
following procedure. All new material
will then be recorded from lhe end of the
current contents. The recorder is 15ctory
set to record over existing material.
Control k ey
(_/B,_ )
MENU/ENTER
1
While the recorder is stopped, press
MENU.
2
Press _ or _ until "OPTION"
flashes in the display, and then press
ENTER.
3
Press _ or _ repeatedly until
"R-Post" flashes in the display, and
then press ENTER.
4 Press _ or _ repeatedly until
"Fr End" flashes in the display, and
then press ENTER.
To start recording from the
current point
Select "FrHere" in step 4.
To temporarily record without recording over
the current contents, press END SEARCI t
bet_Jrethe start of recording. The recording will
begin after the last track, even if "R-Post" is sel
to "FrHere" (l_actory setting). The remaining
recordable time on lhe disc will appear in the
display when you press END SEARCH.
29