Recording A Track Into An Existing Group; Recording Without Overwriting Existing Material - Sony MZ-N707 Operating Instructions Manual

Recording a track into an
existing group
Recording without
overwriting existing
l
This function can be operated on the
material
recorder only.
l
Turn group mode on.
l
lnsert a disc with group settings.
If you wish to avoid overwriting the
current contents of an MD, do the
following procedure. All new material
will then be recorded from the end of the
current contents. The recorder is factory
set to record over existing material.
1
2
3
4
Press GROUP.
" fi " flashes in the display and you
can select a group directly (Group
Skip Mode) (page 36).
Within 5 seconds, press w or w
repeatedly until the group you want
the track to belong to appears.
" fi " flashes and after a while it
lights up in the display.
Press and slide REC to the right.
Play the source sound.
The newly recorded track is added
after the current contents.
Notes
l
Even if "REC-Posi" is set to "From Here",
newly recorded tracks are inserted after the
existing tracks in the specified group without
recording over the current contents.
l
Group skip mode turns off automatically in
step 2 if nothing is done within 5 seconds.
To continue the procedure, do step 1 again.
*..a
c
To add a track that is playing to a group, stop
playing the track first, and then do the
procedure from step 3.
ENTER/ MENU
1
While the recorder is stopped, press
MENU.
2 press I++ or w until "OPTION"
flashes in the display, and then press
ENTER,
3
Press HI or w repeatedly until
"REC-POSY flashes in the display,
and then press ENTER.
4
Press w or w repeatedly until
"From End" flashes in the display,
and then press ENTER.
To start recording from the
current point
Select "From Here" in step 4.
."'.
c
To temporarily record without recording over
the current contents, press END SEARCH
before the start of recording. The recording will
begin after the last track, even if "REC-Posi" is
set to "From Here" (factory setting). The
remaining recordable time on the disc will
appear in the display when you press END
SEARCH.
31 -GB