To Release A Group Setting - Sony MZ-S1 Operating Instructions Manual

4O
Controlkey .........÷/--2----_
GROUP _°°°__)
MENU/ENTER
I
While the recorder is stopped, press
MENU.
2 Press _ or _ repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
3 Press _ or _ repeatedly until
"G:Set" flashes in the display, and
then press ENTER.
The track number of the first Irack
("STR') appears in 1he display.
t'l WI_, W I_ t'W
4
Press I<1<1 or b¢H repeatedly until
the number or name of Ihe desired
first track flashes in the display, and
then press ENTER.
This selects the first track ol'the new
group.
Even when group mode is on, track
numbers appear according to their
order on the disc, not their order
within the group.
S Press _ or _ repeatedly until
the number or name of the desired
last track flashes in the display, and
then press ENTER.
The track number of the last track in
the group ("END") appears in the
display.
This selects the last track of the new
group.
6 Follow steps 4 to 7 of "Labeling
recordings" (page 38) to label a
group.
Notes
• In step 4, the first track must either be the first
track of an existing group or a track that does
notbelong m a group.
• When seleefing the las_ track in step 5, make
sure lbe track comes at_er the one selected in
step 4. The last track must either be the lasl
track of an existing group or a track tha_ does
nolbelong to a group.
To release a group
setting
• insert a disc with group settings.
MENUIENTER
1
Press GROUP for 2 seconds or more
to lurn on group mode.
2 Select a group that you want to
release and check the contents (see
"Selecting and playing groups (Group
Skip Mode)" (page 33)).