Operation - Makita JR3030T Instruction Manual

OPERATION
Press the shoe firmly against the work-
piece. Do not allow the tool to bounce.
Bringthe blade into light contact with the
workpiece. First,make a pilotgroove, using
a slower speed.Then use a faster speed to
continuecutting.
CAUTION:
• Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so wil{ cause
premature blade wear.
• Always wear gloves to protect your hands from hot flying chips when cutting metal.
• Always press the shoe firmly against the workpiece during operation. If the shoe is held
away from the workpiece during operation, strong vibration and/of twisting will be pro-
duoed, causing the blade to snap dangerously.
• Be sure to always wear suitable eye protection which conforms with current national
standard_