Makita JR3030T Instruction Manual page 10

MAINTENANCE
CAUTION:
Always be sure that the tool is switchedoff and unpluggedbefore attemptingto perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both
carbon brushes should be replaced at the
same time. Use only identical carbon
brushes.
Urnit mark
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brushholdercaps.
Brush holder cap
Screwdriver
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjust-
ment should be performed by Makita Authorized or Facto_ Service Centers, always using
Makita replacement parts.
10