GE Spacemaker WSM2780 Use And Care Manual page 8

HOW TO OPERATE YOUR WASHER
WARNING--To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
p,OlA_ M'ZD
HOT WARM
Wash Temperature Water Level
Delicate OFF IS Regular
Perm Press
0 0 OO
Set the controls
See the Controls Setting Guide.
O Select Wash Temperature. Cold rinse will be
automatically provided with all cycles.
O Select Water Level.
LOW: Washer is less than 1/3 full of clothes.
MED: Between 1/3 and 2/3 full.
HIGH: Over 2/3 full of clothes.
O Push Cycle Selector in and turn clockwise to
your selected wash cycle.
O Pull Cycle Selector out to start the cycle.
NOTE: lfyou wish to change cycle setting after
washer has started, push Cycle Selector in and wait
for washer to stop. Then reset to the new position.
Setting can be changed at any time during the
Regular, Penn Press or Delicate cycles.
Self-cleaning lint filter
The lint filter needs no attention from you. Lint collected during
washing and rinsing of clothes is automatically flushed down
the drain.
How to soak in the washer
Set wash temperature control. Add detergent or soak agent. Turn Cycle Selector to
desired cycle. Start the washer. After washer fills and begins to agitate, push in the Cycle
Selector to stop washer. Allow to soak, turn to Spin. Pull out the Cycle Selector to complete the cycle.
Delicate Cycle
To get the full benefit of the Delicate Cycle, always
set the Cycle Selector at the beginning of the cycle.
During wash, the Delicate Cycle alternates between
agitation and pause, to protect delicate clothes.
Delicate
WIN
RINSE
START g
OFF t5 tO
8