Advertisement
Operation
r
1. Waxing
Switch on the tool. Move the tool slow-
ly over the work surface with front t o
back, side to side movement while apply-
ing light pressure t o the tool so that wax
will be applied t o the work surface thin
and evenly.
Apply light pressure
a
Move
slowly
(Note)
*Do not bear down the tool excessively during operation. Smooth and even waxing
cannot be performed because the bottom of the sponge will not move correctly as
designed.
*The tool may become hot during operation. This i s a normal condition and does not
indicate a problem.
I
When resting the tool, use the handy
plastic case provided so that mud and/or
sand will not stick t o the sponge.
/
Plastic case
Buff the dried wax by rubbing the car body surface with a clean, soft and dry cloth.
2.
Removing stubborn dirt and oil film
For removing stubborn dirt from the car body surface and oil film from the windshield,
apply the appropriate polish/cleaner for the application to the sponge and operate the
tool i n the same manner as waxing.
(Note)
When changing from the use of wax, polish or cleaner, always wash the sponge in
detergent solution before starting the next job.
6
Advertisement
