Advertisement
Installing sponge
CAUTION :
Always be sure that the tool is switched off and unplugged before installing or removing
the sponge.
Simply attach the sponge to the pad, using
the Velcro sheet on the sponge and the pad.
(Note)
There is no problem even if the alignment
of the sponge and the pad is slightly off. So
you do not have to align the center of the
sponge t o the center of the pad accurately
when installing the sponge.
Applying wax to sponge
Apply wax t o the entire surface of sponge
thin and evenly.
(Note)
When applying hard or presoftened paste
wax t o the sponge, use the spatula pro-
vided.
Connecting
to
power source
Be sure that the tool's switch is off. Then
insert i t s plug into the cigarette lighter
socket of your car.
Velcro
\
I
Sponge
\
Pad
For hard or
presof tened
paste wax
For liquid wax
Plug
I
Cigarette lighter socket
5
Advertisement
