Section 7: Maintenance; Schedule; Lubrication; Cleaning Bags - Grizzly g0548zp Owner's Manual

section 7: maintenance

always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.

schedule

For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
daily check:
• loose mounting bolts.
• Worn switch.
• Worn or damaged wires.
• Clean canister filter (g0548zp only).
• Check collection bag.
• Any other unsafe condition.

lubrication

since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. do not lubricate them.
-36-
always wear a respirator
and safety glasses when
emptying the dust collection
bags on the dust collector.
sawdust may cause allergic
reactions or respiratory
problems.

cleaning bags

Always empty the collection bags on a regular
basis. Emptying the collection bags allows the
machine to operate at a much higher level of
efficiency.
Always wear the appropriate respirator or dust
mask and safety glasses when emptying the col-
lection bags. small dust particles can escape the
bags during emptying, causing them to become
airborne and easily inhaled. this microscopic air-
borne dust is extremely unhealthy to breathe and
can cause serious health problems.
While this dust collector excels at collecting the
majority of wood dust produced by your machines,
it is not an air filter; therefore, we strongly rec-
ommend the supplemental aid of a shop air filter
such as the grizzly g0572 or g9956. Air filters
are designed to collect the smaller dust particles
that dust collector bags cannot trap.
g0548zp, g1028z2, g1029z2-z2p (mfg. 12/12+)