Table of Contents
Advertisement
CONNECTING
THE INLET HOSE
Method1
The dryer must be connected
to the cold water faucet using the new inlet hoses.
Do not use old
hoses.
t.
If space permits,
attach the brass female end of the "Y"
connector
to the cold water faucet.
2. Turn the cold water faucet
off.
3. Attach the straight
end of long hose to "Y' connector.
4.
Using pliers, tighten the coupling
with an additional
two-
thirds turn.
[_Do
overtighten,
as
may damage
coupling.
not
it
the
5. Attach
angled end of long hoses to fill the valve at the
bottom
of the dryer's rear frame. Screw on coupling
by
hand until it is seated on fill valve connector.
6.
Using pliers, tighten the coupling
with an additional
two-
thirds turn.
[_Do
not overtighten,
as it
damage
the coupling.
may
7.
Check that the water faucets
are on.
8.
Check for leaks around
"Y" connector,
faucets
and hoses.
16 installing
your dryer
DV331AE-0302dA-01
EN.indd
Sec5:16
2011-03-28
12:18:01
I
Hide quick links:
Advertisement
Table of Contents
