V-Chip Lock Menu - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Projection television
Hide thumbs Also See for Mr.Slim WD-52627:
Table of Contents

Advertisement

V-Chip Lock Menu
SeHectV-Chip Lock to perform the functions Histed bellow.
V-Chip allows you to BHock or AHow programs based
upon rating signaHs sent by the broadcaster.
The TV
comes from the factory with the V-Chip Lock in the Off
setting.
You can turn the V-Chip on within the V-Chip Menu or
you can use the V-CHiP button on the remote controH to
conveniently turn the V-CHIP on or off.
The factory preset is TV-PG for TV ratings or PG for
movie ratings, aHHowing onHy programs rated TV-PG/PG
or Hewer. You can change the Mocking HeveH to various
TV ratings and Hettered categories or movie ratings.
After
changing channeHs or devices, there may be up to a 5
second deHay before the V-Chip Hocktakes effect.
To view a V-Chip bHocked program or to watch the
program during a scheduHed Hocktime, you must enter
your four-digit pass code or change the channel to an
unlocked program.
Once you have entered the pass
code, the V-Chip block for that channel or Lock by Time
will remain released until the TV is powered Off and then
On again.
Figure 21. V-Chip pass code screen
V-Chip
Start Time and V-Chip Stop
Figures 20 and 2I
You will see the screen shown in Figure 20 when you
press V-CHIP on the remote control, the first time you
select the V-Chip Lock menu, or after you have canceled
your pass code. To use the Lock, input a four-digit pass
code with the number buttons on the remote control, then
press ENTER. You can delete a number and move back
one space by pressing CANCEL. You can exit without
inputting a pass code by pressing MENU or HOME.
After setting a pass code, the V-Chip Lock is active. The
next time you select V-Chip Lock you will see "...enter
your pass code" instead of "...enter a new pass code."
Figure 20. V-Chip Entry screen
Figure 22
Select the times you would like the V-Chip to be active.
By setting the V-Chip Start Time and V-Chip Stop Time to
the same time, the V-Chip will be active 24 hours a day.
Press ADJUST A or _" to slowly select the time, starting
with the hours. Press and hold ADJUST _, or V to
quickly select the hours, press ADJUST I_ to select the
minutes.
Figure 22. V-Ohio Menu, Start & Stop Time
74
Chapter
5. TV Menu
Screen
Operations

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mr.slim wd-62627

Table of Contents