Table of Contents
Advertisement
t DiamondShield
TM
Removal
You may remove the DiamondShield
TM
screen from your television
if needed.
If you want to remove the shield
but feel you are unable
to do so, please
consult
your dealer for assistance.
Before you begin, place a small piece of
masking
tape on the surface
of the DiamondShield
that faces out, so it may be
easily identified,
if you choose to replace it.
removing
the DiamondShield
TM
OIn
order to remove the
DiamondShield.
you will need
to remove the side molding
panels
from the TV.
Use a
small flat head screwdriver
for
pressing
into the opening
that
is found between
the panel
and
the TV side panel.
Be very
careful
not to scratch
the
screen.
Pull gently
on the
panel
corner with your hand
(wearing
cloth gloves to
prevent
fingerprints
is encour-
aged) to remove the side
molding.
OAfter
removing
the panels,
insert
the flat head screw-
driver
behind
the
DiamondShield
at either
side.
Pull gently
toward
you, to
create
a slight outward
bow in
the shield.
This will cause it to
pop out of the top panel. After
shield
removal,
reinstall
the
side molding
panels.
OTo
reinstall
the
DiamondShield,
remove the
side molding
panels,
slide the
screen
into a side panel
and
replace
the moldings.
[_Important:
Store your DiamondShield
carefully
so that the screen
does not
become scratched.
92
Chapter
3: Using the Special
Features
Advertisement
Table of Contents
