Advertisement
Remote
Control
of the Active AV Network
The AV Network
is a special feature that makes it easier to use your television and other Mitsubishi
A/V components together. When you connect the AV Network, you can point the remote control at
the television, and it will pass the remote control command to other components. You will gain even
more benefits if you have a Mitsubishi VCR equipped for the Active AV Network
and a Mitsubishi
DVD player.
Before you begin, be sure you have:
Made the correct AV Network
connections.
Refer to "'Connection of TV to the
Active AV Network"in
the Connections section.
Connected
yourVCR
to INPUT- I of yourTV
and/or connected your DVD to
DVD INPUT.
Set your VCR's remote control settings toVCR.
Turned yourVCR
video mute setting on.
Turned the Active AV Network
feature in the VCR and the TV's menu to ACTIVE.
Using the PLAY key on the remote,
after selectingVCR
with the slide switch:
Active AV Network
will turn yourVCR
on and begin playing a tape (if tape is
inside).
Active AV Network
will turn your TV on and switch it to INPUT- I.
When you turn your TV off, your VCR will turn off, unless it is playing or record-
ing.
Displaying theVCR
menu
When you set the remote toVCR and then press MENU:
• Active AV Network
will turn on yourVCR
if it is off and display theVCR's menu
(this function may not work with some older MitsubishiVCR's).
• Active AV Network
will turn on yourTV
if it is off and switch it to INPUT- I.
Using the PLAY key on the remote,
after selecting
DVD with the slide switch:
Your remote must be programmed to operate Mitsubishi DVD players.
Active AV Network
will turn on yourTV
and switch it to DVD INPUT.
If your DVD player is in range of the remote and has a disc inside, the DVD
will turn on and the disc will begin playing.
I[
IMPORTANT
when"
"
_po_
yo_emo_o_ol_EL_o_
I
53
Advertisement
