Advertisement
OperatingYour
Remote
Control
Installing
the batteries
I. Remove the back cover of the remote control by pushing the
the direction of the arrow and sliding off the cover.
2. Load the batteries, making sure the polarities(+) and (-) are correct.
IMPORTANT
When
you replace
the batteries
in your remote
control,
the remote
may return
to its initial
setting.
You may need to set up your remote
again.
tab in
For best results
Be within 20 feet of the equipment when using the remote control.
Don't press two or more buttons at the same time, unless you are
specifically instructed to do so in this owner's guide.
Don't allow the remote control to get wet or become heated.
Avoid dropping the remote control on a hard surface.
When cleaning the remote control, don't use any harsh chemicals.
Use only a soft, slightly moistened cloth.
Don't mix new batteries with old ones.
Don't heat, take apart, or throw batteries into a fire.
Use alkaline batteries.
Using the remote
control
with yourTV
You can use your remote to control the TV, CABLE/DBS,VCR,
DVD or AUDIO.
The remote has been preset to operate the
TV and other Mitsubishi products.
It can be set to control
other audio/video equipment.
To operate the TV, the select switch at the top of the remote
should be set toTV.
16
I_
C_LE/DB$
VGR
DVD
ooo
0
O
O 0
O
O 0
Advertisement
