Table of Contents
Advertisement
Programming
a recording
(TIMER)
General
Use programmed
recording
(TIMER) to automatically
start and stop a recording
at a later date.
The DVD
Recorder
will switch to the right channel and begin recording
at the correct
time.
With
this DVD recorder,
you can pre-program
up to 6 recordings
within a period
of one year.
To make a programmed
recording,
your DVD Recorder
needs to know:
* the date of the recording
* the channel number of the TV channel
* the start and stop time of the recording
* the recording
mode ('M1/M2/M2x/M3/M4/M6')
This information
is saved in a TIMER block.
Before you begin, make sure the clock is set. If the clock is not set, the 'Time/Date'
menu will
appear when you press the
TIMER
button.
STANDBY
I
Programming
a recording
with the 'VCR
I
Plus+ ®system
I
Thanks to this programming system, you no longer need to tediously enter the date, TV channel,
start and end times. All the information needed for programming is contained in the PlusCode
programming number. This 8-digit PlusCode number is found in most TV listings for magazines
3
4
Switch on the TV. Select the channel number for the DVD
Recorder (channel 3 or 4 or the Audio/Video In channel).
With
the Recorder
on, press
TIMER
on the remote
control.
The programming
method
selected last is marked.
Select line 'VCR Plus+ system' using CH-•
or CH+ •
and
confirm with • ,
Enter the entire PiusCode number. This number is up to 9 digits
long and can be found next to the start time of the TV program
in your TV listings magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the RusCode number.
If you make a mistake, you can clear the entry with CLEAR.
[ _:inegC t isEgdacl;/,_: leek_Y frroC : °t_lcei f g,_owi ng options:
Mo-FI':
Repeated daily recordings from Monday to Friday.
I week¥
Repeated week{y recordings (every week on the same day).
Timer
VCR Plus+ system
PlusCode number
M0-Fr/Weekly
To store
Press SELECT
Press OK
60
Programming
a recording
(TIMER)
Advertisement
Table of Contents
