Table of Contents
Advertisement
Connecting
with a S-Video
(Y/C)
cable
This connecting
cable, also known as the SVHS cable, is used to transmit
the brightness
signal (Y
signal) and color
signal (C signal) separately
This
mini DIN
jack/plug is also called a Hosiden
jacldplug.
Have the following
cables ready:
an antenna cable (I, supplied),
a power
cable (2, supplied),
a S-video (SVHS) cable (3), an audio
cable (4, supplied with red/white
ends).
1
2
Remove the antenna cable plug from your TV, Insert it into the
ANTENNA IN jack at the back of the DVD recorder.
Insert
one
end
of the
supplied
antenna
cable
into
the
TV
OUT jack at the back of the DVD
Recorder
and the other
end
into the antenna input jack at the back of the TV
ANTENNA
3
Use a S-Video (SVHS) cable and plug one end into the S-VIDEO
OUT jack at the back of the DVD Recorder and the other end
into the S-Video (SVHS) In jack of the TV (usually called S-Video
in or SVHS in See your TV's instruction manual)
4
Use the supplied
audio (cinch) cable and plug one end into
the
redlwhite
cinch jack
OUT
L AUDIO
R at the back of the DVD
Recorder
(next
to
S-VIDEO
OUT)
and the
other
into the
corresponding
red/white
audio input jack of the TV (usually called
Audio in', 'AV in'. See your TV's instruction manual).
Switch on the TV, Then switch
the set to the SVHS input jack or
select
the
corresponding
channel
number,
For
the
channel
number, please see your TV's instruction
manual.
6
Connect
the
mains jack
_MAINSat
the
back of the
DVD
Recorder
with the power supply using the supplied power
cable.
The most
important
features
of the DVD
Recorder
will appear
on the display.
After
the
initial
installation
is completed,
this function
will
be
switched
off. How you switch
on this function
again, read in the
chapter
'User preferences'
in the section
'Standby'
14
Connecting
the DVD Recorder
Advertisement
Table of Contents
