Table of Contents
Advertisement
Connecting
the DVD
Recorder
Prepar!ng
the remote
control
for
operation
The remote control and its batteries are packed separately in the original DVD Recorder
packaging, You must install the batteries in the remote control - as described in the paragraph
below - before use,
Take the remote control
and the enclosed batteries (2 AA
batteries),
Remove
the
battery
compartment
lid,
insert
the
batteries
as
shown,
then
replace
the
battery
compartment
lid,
Always
install
the
+/-
ends
of
the
batteries
as
indicated
inside
the
battery
compartment,
The remote
control
is now ready to use.
Its range is approximately
16-32 feet (5 to 10 meters).
'correct
aiming'
of the remote
control
In the following sections, you require the remote control for the first
time. When using the remote contro{, always aim the front part of it at
the DVD recorder, not the TV,
Tip
Connecting
your
DVD
Recorder
to the
TV
The necessary cable connections must be made before you can record or playback TV programs
using your DVD recorder.
Connect the DVD Recorder directly to the TV. Connecting a video cassette Recorder between
the DVD Recorder and the TV could result in poor picture quality.
When you install your DVD Recorder
for the first time, select one of the following
options:
'Connecting
with
S-Video
(Y/C)'
If your TV is equipped with a S-Video (SVHS) jack.
Connecting
the DVD Recorder
I I
Advertisement
Table of Contents
