Using Your Side Burner; Using Your Rotisserie - KitchenAid KBNU367T Manual

Us is 8 .......
Burn Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Doing so can result in burns.
Lighting the Side Burner
1. Remove the side burner cover. Do not light burners with the
cover on.
2. Do not lean over the grill.
3. Push in and turn the control knob to LITE/HI and hold in.
5. Push in and turn the burner knob to LITE/HI for the burner
closest to the lit match. The burner will light immediately.
When burner is lit, turn knob to desired setting.
i
6. Repeat steps 2 through 5 for each burner.
7. Remove match and replace manual lighting extension inside
the cabinet drawer.
IM PO RTANT:
If burner does not light immediately, turn the burner knob to OFF
and wait 5 minutes before relighting.
If any burners do not light after attempting to light them manually,
contact the KitchenAid Customer eXperience Center. See the
"Assistance or Service" section.
m
4. You will see the igniter glow. When burner is lit, release the
knob. Turn knob to desired setting.
5. Repeat for each of the other burners as needed.
IMPORTANT: If burner does not light immediately, turn the
burner knob to OFF and wait 5 minutes before relighting.
Manually lighting the side burner
1.
2.
Do not lean over the grill.
Remove the manual lighting extension (see following
illustration) and attach a match to the split ring.
\
3.
4.
Portable grills - right-hand
cabinet drawer
Built-in grills - right-hand side
flange
Strike the match to light it.
Guide the match to the burner you wish to light.
A
D
A. Rotisserie motor
B. Spit rod
C. Rotisserie fork
D. Rotisserie burner
For best cooking results, do not use main grill burners when
using the rotisserie.
The rotisserie system is designed to cook food from the rear
using intense, searing infrared heat.
NOTE: To avoid product damage when not using the rotisserie,
remove motor and store indoors. Remove spit rod and forks.
Store out of reach of children.
To Use:
1. Remove warming shelf.
2. Mount rotisserie motor on the grill's mounting bracket.
Position it securely into support bracket slots. Plug single-
prong plug 500 mAmp transformer assembly into rotisserie
motor.
B
A
A. Rotisserie motor
B. Single-prong power cord
20