JVC TV-13140 User Manual page 27

REMOTE CONTROL
2
3
?
8
9
15
16
20
21
DESCRIPTION OF CONTROLS
1. TIMER Button - Used to set the TVNCR to start
recordingat a preset time.
2. INPUT Selector Button - Switches the program for
viewingbetween the VCR and externalinputsoumes.
3. CALL Button - Displaysthe presenttime/day of the
week, channel,counter,speed selection(and VCR
mode if VCR is playing)on the "IV screen.
4. TV/CAPFFEXT Button - Switches between Caption,
Textand TV modes for Closed-Captionedprograms.
5. REW (Rewind) Button - In the Stop mode, this
button rapidlywinds the tape backwards. In the Play
mode, this button activates reverse seamh.
6. REC Button - Press once togetherwith the PLAY
button to start normal recording.Additionalpresses
activate InstantTimer Recording.
7. MUTING Button - Press to turn off the sound. Press
again to turn the sound back on.
8, CANCEL Button - Press to cancel existingsetupsor
to restoredefault values.
9. ENTER Button - Press to enter selected setup.
10. POWER Button - Press to turnthe TV/VCR on.
Press again to turnthe TV/VCR off.
11. COUNTER RESET Button - Used to resetthe
counterto 00:00:00.
12. RETURN Button - Switchesbetween the present
channel and the last channel selected.
13. FF (Fast Forward) Button - In the Stop mode, this
button rapidlywindsthe tape forward. In the Play
mode, this buttonactivatesforward seamh.
14. PAUSE Button - During recording,this button
temporarilystops the tape. Duringplayback, it stops
the tape and displaysa stillimage on the "IV screen.
15. SLEEP Button - Sets the TV to turn off automatically
alter up to 120 minutes.
16, MENU Button - Press to display the On-Screen menu
function.
17. SP/EP Selector Button - Sets the tape speed for
recording.
18. Direct Channel Selection Buttons (0-9) - Allows
directaccess to any channel.
19. Digital AUTO TRACKING Buttons - Allowsautomatic
or manualadjustmentof trackingto minimizepicture
noiseduring playback.
20. STOP Button - Press once to stop the tape.
21. CHANNEL + / - Buttons - Pressthe + buttonto
changeto a highernumberedchannelset intomemory.
Press the - buttonto change to a lower numbered
channel set into memory.
22. PROGRAM Button - Pressto confirmthe programmed
timer recordingand ON/OFF timer.
23.ZERO RETURN Button - Use to stopthe tape when
the counterreaches 00:00:00.
24. PLAY Button - Pressto play a prerecordedtape.
25.VOLUME + I - Buttons - Press the + button to
increase, or the - buttonto decrease the volume level.
26. SET + / - Buttons - Used to selectthe optionin the
menu or set timer recording,ON/OFF timer, channel
set, picture adjustment, auto repeat, clock and
language.
27