Symbol Meanings - Craftsman 320.26314 Operator's Manual

SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!
This tool has many features for making its use more pleasant and enjoyable.
Safety, performance, and dependability have been given top priority in the
design of this product making it easy to maintain and operate.
WARNING: Some dust created by using power tools contains chemicals
known to the state of California to cause cancer and birth defects or other
reproductive harm.
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols, and the explanations with them, deserve your careful attention and
understanding. "The symbol warnings DO NOT, by themselves, eliminate any dan-
ger. The instructions and warnings they give are no substitutes for proper accident-
prevention measures.
_k WARNING: BE SURE to read and understand all safety alert symbols, such as
"DANGER," "WARNING," and "CAUTION" BEFORE using this product. Failure to
foltow all instructions may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANINGS
A_k DANGER: Indicates an imminently hazardous situation, which, if not avoid-
ed, will result in death or serious injury.
_k WARNING: Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
_ik CAUTION: Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
_k WARNING: To ensure safety and reliability, all repairs should be performed by
a qualified service technician at Sears Service Center.
_!_ WARNING: The operation of any power tool can result in for-
eign objects being thrown into your eyes, which can result in severe
eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face
shield when needed° We recommend Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with side shields. Al-
ways use eye protection which is marked to comply with ANSI Z87.1.
26314 ManuaLRev]sed_0743322 Page 3