Electric Brake - Craftsman 320.26314 Operator's Manual

ELECTRIC BRAKE
To stop the reciprocating saw, release the trigger switch and allow the tool to
come to a complete stop. The electric brake quickly stops the saw from stroking.
This feature engages automatically when you release the trigger switch.
LED WORK LIGHT (Fig. 7)
The LED work light located on
the front of the saw wil! come
on when the trigger switch is
depressed. The LED work light
will turn off when the trigger
switch is released. This pro-
vides additional lighting on the
surface of the work piece for
operation in lower-light areas.
INSTALLING SAW
BLADE (Fig. 8)
I. Remove the battery pack.
2o Insert the saw blade into
the blade clamp as far as
possible; it will lock in posi-
tion automatically.
Fig. 7
LED WorPJtght
26314 Manual Revised_07-0322 Page 19