Blade Selection - Craftsman 320.26314 Operator's Manual

REMOVING SAW BLADE (Fig.9)
1. Remove battery pack.
2. Turn down the blade
clamp lever.
3. Remove the blade saw
from the blade clamp.
BLADE SELECTION
To obtain the best perfor-
mance from the saw, it is
important to select the correct
blade for the particular ap-
plication and type of material
you wish to cut. By doing this,
you will get a smoother, faster
cut and prolong blade life.
BASE (SHOE) ASSEMBLY
To Slide Shoe In or Out (Fig. 10)
The base assembly slides in
or out to adjust the effective
stroke length for maximum
control and longer blade life.
1. Remove the battery pack.
2,
Press the shoe's release
button and slide shoe out
to desired position. The
shoe can be locked in any
of 4 positions.
3. Release the shoes release
button to lock the shoe in
desired position.
To Pivot Shoe (Fig. 11)
The shoe pivots to provide
maximum control against the
surface being cut.
1. Remove the battery pack.
2. Hold the saw securely, and
then pivot the shoe to the
desired position.
Fig. 9
Fig. 10
Fig. 11
26314 ManuaLRevlsed_07-0322 Page 20