GE AGF05 Owner's Manual And Installation Instructions page 11

Read completely, then follow step-by-step.
Window Requirements
_):':These instructions are fin" a standard double-
hung window, Ym will need to modifY' then/fin.
other types of windo_:s.
_):':The air conditioner can be installed without
the sliding panels if needed to fit in a narrow
window, See the window opening dimensions
to the right.
_ _MI supporting parts must be secured to tim/
WOO(I_ i//}lsoni'v oi"
metal.
_{_: T he electrical outlet must be within reach of the
power cord.
Do
not rise }lIl extension cord.
13"rain.
22" to 36"
(with slidingpanels)
I
l
I
18Y4"rain.
(withoutslidingpanels)
Storm Window Requirements
A strum window fi'ame will not allow the air
conditioner to tilt towards the outside and will
kee I) it from draining properly: To at!just fin" this,
attach a piece of wood to the stool,
1/2" higher
thanframe
Stormwindow
frame
t Stool
Wood
WOODPIECES--
WIDTH:
2"
LENGTH: I,ong
enough to fit inside the window
Ji';I Ill e.
THICKNESS:To
demmfine the thickness, place a
piece oI wood on the stool to make it 1/2" higher
than the top of the stom_ window ti'ame.
Attnch secm'elv with nails or screws provided by
the instnlle_:
Prepare the Window and the Case
] Cut the window sash seal to the proper length.
Peel off the backing and attach the seal to the
tmde_ide of the window sash.
Sash
_] Insert the sliding panels into the guides of the
air conditioner and attach them to the case
with 8 Type B screws, 4 on each side.
Use Type B screws.
11