Electronic Control Settings; Adjusting Oventemperature; Userpreference Menu - Electrolux EW30ES65GWA Use & Care Manual

Electric slide-in range
Hide thumbs Also See for EW30ES65GWA:
Table of Contents

Advertisement

Electronic Control Settings
:37'
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The User Preferences menu includes all userdefined options. This feature enables you to control
the various options of the electronic controls. This menu features the Time of Day, Celsius or
Fahrenheit display mode, Continuous Bake or 12 Hour Energy Saving modes, Clockdisplayor
I_'_J
No-Clock display, 12 Hours Timeof Dayor24 Hours Time of Day, Audio Control, and Adjusting
I_._
the oven temperature. The User Preferences menu is only available when the oven is not being
................................
used (not cooking).
To browse through the User Preferences menu:
1.
Press USER PREF I_
to bring up the User Preferences menu.
2.
Press USER PREF _--_ again to browse through the menu pages,
i:
+
-
3.
Press m-or ,o' to toggle between the available ophons.
.....................................
4.
Press START <_> while the chosen option is on display to change.
5.
Press CANCEL @ when finished to get back to the standard oven display.
User Preferences menu items:
• CLO 12:00; Setting the clock.
• F-C F • Fahrenheit/Celcius
display.
• CLO on; Clock on/off.
= AUd ; Audio on/off and volume.
° CLO 12hr; 12/24 hour time of day display.
° E S on ; 12 hour Energy Saving on/off.
° UPO; Adjusting oven temperature.
• rSt • Reset to default factory settings.
SE (NG THECLOCK-TiMEOFBAY
The clock may be set for 12 or 24 hour time of day operation (see advanced settings section).
The clock has been preset at the factory for the 12 hour operation. When the range is first plugged
in, or when the power supply to the range has been interrupted, the display will show "CLO
12:00". The clock must be set before the oven can be used.
When power to the unit has been interrupted, "12: 00" appears and flashes in the display. To set
the Clock in this case, skip step 1 in the example below and follow steps 2 and 3.
To set the clock (example for 1:30):
1.
Press USER PREF _
until you get to the CLO 12:00 menu page.
2.
Press\l_,_3_,_O_ padstosetthetlmeofdayto
l:30. Thepads hi Or locanalsobepressed
to raise or lower the actual time displayed,
3.
Press START <_ to accept the changes and go back to user preferences menu display,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents