Chip Shield Deflector; Dust Collection With Dust Extraction Hood - Craftsman 320.17542 Operator's Manual

CHIP SHIELD DEFLECTOR (Fig. 19)
_ WARNING:
ALWAYS wear eye protection.
The chip shield deflector is not intended as a safety guard.
To remove chip shield from fixed base, press
inward on tabs until chip shield releases from
base and remove itoTo attach, place chip shield
back in position and flex sides while pushing it
in until it snaps back into place (See Fig. 18)_
Fig. 19
Tabs
i
_ WARNING:
The chip shield deflector helps keep dust and chips away from the operator; it will not stop objects larger than woodchips thrown from the bit.
j CAUTION: ALWAYS have the chip shield deflector in place on the base when
operating the router.
WARNING:
ALWAYS turn motor off and unplug router from power source
before making any adjustments or installing accessories. Failure to turn motor off
and unplug router could result in accidental starting which can cause serious
personal injury.
DUST COLLECTION WITH DUST EXTRACTION HOOD (Fig. 20)
There is a dust extraction hood included
with this router.The hood is sized to
accept a 11/4-in. vac hose adapter,
sold separately.
To attach the hood onto the fixed base,
position and secure it to the back of the
base with the two screws (included)
as shown in Fig. 20
Fig. 20
i
2 screws included
30