Unpacking - Craftsman 320.17542 Operator's Manual

ADDITIONAL RULES FOR SAFE OPERATION cont.
7. ALWAYS check the tool for damaged parts. Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine if it will operate
properly and perform its intended function. Check for misatignment or binding of
moving parts, breakage of parts, and any other condition that may affect the tool's
operation. A guard or other part that is damaged should be properly repaired or replaced
at a Sears Service Center°
84
9.
INSPECT and remove all nails from lumber before routing.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct
others who may use this tool. If someone borrows this tool, make sure they have
these instructions also.
z_ WARNING:
Your router should NEVER be connected to the power source
when you are assembling parts, making adjustments, installing or removing
collets / nuts, cutter bits, cleaning or when it is not in use. Disconnecting the
router will prevent accidental starting, which could cause serious personal
injury.
1 .. The Edge Guide is screwed down with a wing nut into the top of the storage/carrying case.
2. The Sawdust Extraction Hood is secured in the top of the case with hook and loop strap_
3. The Parts Bag is tucked inside the sawdust hood's extraction chute,.
Open the Parts Bag to locate the following:
. 2 Screws used to attach hood to base
o 1/4-in. Co!let/Nut
4.. The Collet / Nut Wrench is force-fitted into the top of the case.
NOTE: The 1/4-inch collet!nut comes installed in the motor
5. Carefully lift the Fixed Base with Motor and the 1/2-inch co!let!nut already installed,
out of the case and place on a stable flat surface.
6, Inspect the items carefully to make sure that no breakage or damage has occurred
during shipping, tf any of the items mentioned are missing, (refer to "PARTS LIST"
illustration on page 11), return the router to your nearest Sears store or Craftsman
outlet to have the router replaced°
Z_ WARNING:
If any parts are broken or missing, DO NOT attempt to plug
in the power cord or operate router until the broken or missing parts are
replaced. Failure to do so could result in possible serious injury.
10