Timer Operations - Sharp FO-5600 Operation Manual

Table of Contents

<P=001>

The Timer function allows you to set an operation to be performed automatically at a

time you specify. Up to 48 operations can be set at any one time, and the time of each

can be set up to a week in advance.

You can use this function to take advantage of lower off-peak call rates without having

to be there when the operation is performed.

Note:

DOCUMENT

The

Initial procedure

To set a timer operation, first perform the following basic procedure. After you have

completed it, refer to the procedure for the specific operation you want to set (see the

following pages).

Code numbers are used to specify days of the week. Refer to the table below when

making time settings which include a specified day:

Day

SUN

Code

Step

Press these keys:

TIMER

START