Attachments And Connections - Sharp FO-5600 Operation Manual

DD <P=001>

ATTACHMENTS AND CONNECTIONS

Power lead
Telephone line cord
For
Australia
TEL.
LINE
For New Zealand
Your fax is set for tone dialling. If you are on a pulse only dial line, you must set the fax for
pulse dialling by changing Option Setting 21. This procedure is described in Chapter 5,
"Optional Settings".
Moving your fax and reconnecting
Should it be necessary to move your fax to a new location, first disconnect the
telephone line cord before disconnecting the power lead. When reconnecting, it is
necessary to connect the power lead before connecting the telephone line cord.
Plug the power lead into a 230-240 V,
50 Hz, earthed (3-prong) AC outlet.
Caution: When disconnecting the fax,
unplug the telephone line cord before
unplugging the power lead.
Insert one end of the telephone line
cord into the adapter. Insert the other
end of the line cord into the socket on
the back of the fax marked "TEL.
LINE". Plug the adaptor into the
telephone socket on the wall.
If desired, you can connect an exten-
sion telephone to the socket on the fax
TEL.
SET
marked "TEL.SET".
Important: In New Zealand, not all standard
telephones will respond to incoming ringing
when connected to the extension socket of the
equipment.
INSTALLATION
FO5600A-ISAC
1-5