Using The Saddle Stitch Finisher To Make Copies - Sharp AR-F14N Operation Manual

■ Using the saddle stitch finisher functions in printer mode
To use the staple function, select "Left", "Right", or
"Top" for "Binding Edge" and "1 Staple" or "2 Staples"
for "Staple" in the "Finishing" field on the "Main" tab of
the printer driver setup screen (shown at right).
To use the pamphlet function, select the "Pamphlet
Style" radio button in the "Document Style" field and
then select "Tiled Pamphlet" or "2-Up Pamphlet". In
the "Finishing" field, select "2 Staples" for "Staple".
The "Pamphlet Style" function is not
Caution
available unless the printer
expansion kit is installed.
Using the punch function when an optional punch unit is installed
To use the punch function, select the "Punch" checkbox in the "Finishing" field of the "Main" tab shown above.
• To use the above printer function, the peripheral device installation settings must be correctly configured in the
Note
printer driver properties. To configure the peripheral device installation settings, right-click the icon of the
installed printer driver, select "Properties", and then select the "Configuration" tab. (In Windows 95/98/Me/NT
4.0, select "Properties", select the "Setup" tab, and then select the "Configuration" tab.)
• The paper selection and combination of functions already selected may prevent some settings from being
selected. For detailed explanations of the settings, see the Help file for the printer driver.

USING THE SADDLE STITCH FINISHER TO MAKE COPIES

■ Orientation of the original when using the saddle stitch finisher function
When using the saddle stitch finisher to staple, make pamphlets, or punch holes, place the original as shown
below. Staple and punch positions vary depending on the staple position setting and the orientation of the original.
Using the RSPF
Place the original face up.
(11" x 17", 8-1/2" x 14" and 8-1/2" x 13" (A3 and B4) size portrait originals)
• When loading letterhead paper in the tray, orient the paper so that
Note
the letterhead is away from you or to the left, as shown at right.
• When the staple sort or punch function is used, the automatic original
image rotation function does not operate.
6
PCL printer driver on the Windows XP as an example
Using the document glass
Place the original face down.
Staple positions (example)
Top left staple Two left staples
lower left staple
SHARP