Misfeed In The Saddle Stitch Finisher - Sharp AR-F14N Operation Manual

■ Misfeed in the saddle stitch finisher

1
Press the detach button and separate
the saddle stitch finisher from the
machine.
The saddle stitch finisher and the
Caution
machine are connected at the rear.
Exercise caution when pulling them
apart.
2
Remove any misfed paper from the
machine.
3
If there was no misfed paper in step 2,
pull roller rotating knob B on the
punch unit toward you and rotate it.
(Only when an optional punch unit is
installed.)
Roller rotating
knob B
4
Open the top cover.
12
Rotating roller rotating
knob B releases the
caught paper.
5
Remove the misfed paper.
6
Close the top cover.
7
Remove any misfed paper from the
stapler compiler.
8
Open the cover of the saddle stitch
section.
9
Remove the misfed paper.
Remove the paper
gently, taking care not to
tear it.
Remove the paper
gently, taking care not to
tear it.
Remove the paper
gently, taking care not to
tear it.