REMOVING PAPER MISFEEDS
When a paper misfeed occurs during copying, a message and picture will appear in the display of the operation
panel as shown below and copying will automatically stop. Follow the procedures below to remove the misfeed.
When a misfeed occurs, you can touch the [INFORMATION] key to display brief instructions for removing the
Note
misfeed.
■ Misfeed in the relay path
1
Grasp the hand hold on the center
cover and open the cover.
2
Remove the misfed paper from the
conveyor unit.
3
Close the center cover.
A MISFEED HAS OCCURRED.
INFORMATION
Remove the paper
slowly, taking care not to
tear it.
11