Sharp MD-DR470H Operation Manual page 53

" To combine tracks
Two adjacent tracks can be combined.
1
Whilst in the stop mode, select the latter of the
two tracks to be combined by pressing the
or button.
2
Press the MENU button.
The unit enters the menu select mode.
3
Select "EDIT" by pressing
the or button and
press the MENU button.
4
Select "COMBINE" by
pressing the or but-
ton and press the MENU
button.
5
Press the MENU button.
The two tracks will be com-
bined, and the unit will stop at
the beginning of the combined
track.
Notes:
! A track in the pause mode can also be combined.
! To edit a group-recorded MD, select the group mode.
MD-DR470H(E) TINSE0513AWZZ
To combine two non-adjacent tracks:
! First, put the two tracks next to each other in the order
you want using the MOVE function. Then combine
them using the COMBINE function.
! For group-recorded tracks, only those in the same
group can be combined. To combine tracks in different
groups, move one track using the GROUP CHANGE
function before combining them.
When one or both tracks to be combined have a
name:
The first track name will be used. However, when the first
track does not have a name, the second track name will
be used.
In the following cases, tracks may not be combined.
! Tracks recorded by different inputs cannot be com-
bined.
Examples:
! Digital recorded track and analogue recorded track.
! Different recording modes (stereo recording, 2 times
long recording, 4 times long recording, monaural re-
cording).
! Tracks whose recording time is less than 12 seconds.
03/3/25 MD_DR470H_UK_6.fm
MD-DR470H
9
8
7
6 6
5 5
4 4
3 3
2 2
1 1
53