Scanning A Document Using The Ica Driver (Mac Os X 10.6.X); Using Image Capture - Brother MFC-J6510DW Software User's Manual

Scanning

Scanning a document using the ICA driver (Mac OS X 10.6.x)

You can scan a document using one of the following methods:
 Using the Image Capture application
 Scanning directly from the "Print & Fax" section

Using Image Capture

In order to use Image Capture included with Mac OS X 10.6.x, the ICA Scanner Driver is required. The
Brother CUPS Printer Driver for Mac OS X 10.6.x contains the ICA Scanner Driver. To install the ICA Scanner
Driver, go to the downloads selection located on the main page for your model on the Brother Solutions
Center (http://solutions.brother.com/).
a
Connect your Brother machine to the Macintosh using a USB cable. Or connect your Brother machine
to the same LAN where the Macintosh is connected.
b
Launch the Image Capture application.
c
Select the machine from the list on the left side of the screen.
If you connected the Brother machine and your Macintosh with a USB cable, you will see the machine
in the DEVICES area. If connected via LAN, you will see it in the SHARED area.
9
9
9
143