Configuring The Network Pc-Fax Receiving Settings - Brother MFC-J6510DW Software User's Manual

Brother PC-FAX Software

Configuring the Network PC-FAX Receiving Settings

The settings to send received faxes to your computer were automatically configured during the installation of
MFL-Pro Suite. (See the Quick Setup Guide.)
If you are using a different machine than the one that was registered to your PC during the installation of the
MFL-Pro Suite software, follow the steps below.
a
In the PC-Fax Rx Setup dialog box, click Network Settings. The Network Settings dialog box
appears.
b
You must specify the IP address or node name of your machine.
Choose the appropriate connection method.
Specify your machine by address
Enter the IP address of the machine in IP Address.
Specify your machine by name
Enter the machine's node name in Node Name, or click Browse and choose the correct Brother
machine you want to use from the list.
Display Your PC Name
You can specify the PC name that will appear on the display of the machine. To change the name, enter
the new name in Display Your PC Name.
5
5
100