Yamaha DSP-Z11 Owner's Manual page 48

Optimizing the speaker setting for your listening room (YPAO)
15
Once the setting has been completed, press
9ENTER.
This unit starts the measurements of the speaker angles.
16
Once the following display appears in the video
monitor, move the optimizer microphone to the "(2)"
position on the microphone base.
Equalizing
Level
Angle Check
Angle
Result
17
Press 9ENTER to resume the measurements.
18
Once the following display appears in the video
monitor, move the optimizer microphone to the "(3)"
position on the microphone base.
Equalizing
Level
Angle Check
Angle
Result
19
Press 9ENTER to resume the measurements.
20
Once the measurement procedure has been
complete, following display appears in the video
monitor.
See page 45 for details.
Angle Check
Angle
Result
48
En
Put the microphone at
2nd listening position
Next:ENTER
1
3 2
Put the microphone at
3rd listening position
Next:ENTER
1
3 2
Retry
Exit Detail
Setup
Measurement Over
Successfully
For other configuration of the listening position
The following examples indicate the measurement points when
there is a listening position or are two listening positions.
Example 1: Two listening positions
We recommend that you make measurements in front of and
behind the listening positions as well as the listening positions.
1
Example 2: One listening position
We recommend that you make measurements around the
listening position as well as the listening position.
4 1
3
2
4
2
3