Epson Stylus Photo 2000P Printer Basics Manual page 38

4. Select these settings:
Roll Paper
(3 mm) on both sides of your printout
or
Roll Paper–No Margins
(available only at certain paper widths: 4, 8.3, 8.5, and 12.95 inches).
Choose a Paper Size that matches the size of the document you created in
your application. (If necessary, click the
of your document, then name the size and click
Select
Banner
If you're printing more than one copy of the image and you want to
print a cutting line between copies, select Cut Sheet Mode, then
click the Print page frame checkbox.
5. Click .
OK
6. Select from the File menu. You see your printer settings dialog box:
Print
Select the correct
Media Type setting
for your paper
Make sure
PhotoEnhance
is turned off
7. Select the correct Media Type setting for your paper. (If you're not sure which
setting to use, see "Choosing the Correct Media Type Setting" on page 25.) Also
make sure the
PhotoEnhance
8. Select the number of copies you want to print and click
as the Paper Source; this leaves a margin of at least 0.12 inch
if you want to print your image edge-to-edge
as the Roll Paper Option.
setting is turned off, or it could affect your margins.
button and enter the size
Customize
.)
OK
.
Print
33