HP D2D Service And Maintenance Manual page 18

4. Be sure to update the HP D2D software to the latest version. This is done from the Web
Management Interface (Settings/Software page), as described in the HP StorageWorks D2D
Backup System User Guide.
IMPORTANT:
you may experience a message of "Devices Starting" or "Initialising". This message will also
occur, if the D2D Backup System did not shutdown correctly. In this case, please wait a
minimum of 12 hours before updating software.
Figure 1 1 HP D2D 41 12, HP D2D4004 or HP D2D4009 G1 flash memory module
Figure 12 HP D2D2500 G1 Series flash memory module
1 cable and USB connector to the memory module
2 screw and bracket securing USB cable connector
3 cable and connector to the motherboard
4 flash memory module
18 The flash memory module
If your replacement flash stick is at a lower revision than the one it replaces,