Default Settings
The table below shows the default conditions that become valid
when the printer is initialized.
Item
Top of form position
Left and right margins
Line spacing
Vertical tab position
Horizontal tab positions
VFU channel
Font selection
Character pitch
Justification
Special printing effects
User-defined character set
Graphic mode assignment
In addition,
when
or by an INIT signal,
Technical Specifications
5-12
Current paper position
Cancelled
1/6-inch line spacing
Cleared
Every eight characters
Channel 0
Hardware: reset to current DIP switch setting.
Software:
Reset to current DIP switch setting.
Left justification
Cancelled
Hardware: cleared
Software: Deselected only
ESC K = ESC * 0, ESC L = ESC * 1,
ESC Y = ESC * 2, ESC Z = ESC * 3
the printer is initialized by turning on the power
data buffer is cleared of all text.
the
Reset to:
reset to the current SelecType setting.