Testing The Printer; Plugging In The Printer - Epson ActionPrinter L-1000 User Manual

Testing the Printer

Now that your printer is fully assembled, you can use the built-in
self test function to see that the printer is working correctly even
though it is not connected to a computer. Be sure to perform this
test to check that your printer is operating properly.
Before running the self test, you need to connect your printer to an
electrical outlet and load a sheet of paper.

Plugging in the printer

Follow these steps to plug in the printer:
1. Be sure the printer is turned off.
Plug the power cable into a properly grounded electrical outlet.
2.
WARNING:
least five seconds before turning it back on. Turning
power on and off rapidly can damage the printer.
After turning the printer off, always wait at
Setting Up the Printer
the
1-13